HOME  »  Andre's 1968 Triumph GT6 MK1 - 2009 Photo Gallery » 07 Feb 2009 3.89 & Tach Drive »  Viewing DSCN4407     [Image 9 of 24]  :: Jump To  
  First slide Previous slide      Show/Hide EXIF Info Index Page Start/Stop the slide show      Next slide Last slide  
Comment: Ok next project. Tach drive. This old delco unit is shot. Doc from the OVTC told me its trashed.
DSCN4402 * The 3.89 will drop my highway RMP's by about 500 and extend my gears a bit over the current 4.11. * The 3.89 will drop my highway RMP's by about 500 and extend my gears a bit over the current 4.11. * 2288 x 1712 * (1.46MB)

DSCN4403 * Found this in my inspection. Think it was just junk in the box. * Found this in my inspection. Think it was just junk in the box. * 2288 x 1712 * (1.26MB)

DSCN4404 * Overall everything looks good. I will do a spec test in a few days. * Overall everything looks good. I will do a spec test in a few days. * 2288 x 1712 * (1.4MB)

DSCN4405 * 2288 x 1712 * (1.4MB)

DSCN4406 * If I have to take it apart I will blast the case and have it powder coated. * If I have to take it apart I will blast the case and have it powder coated. * 2288 x 1712 * (1.41MB)

Click for the original image
 
DSCN4407.JPG - 2288 x 1712 - (1.41MB)
Download file (1.41MB)
Feb 07, 2009 - 03:26 PM
DSCN4408 * So I've cut the top off and will use it too drive my tach. * So I've cut the top off and will use it too drive my tach. * 2288 x 1712 * (1.34MB)

DSCN4409 * Used the saw too keep James from waking up. * Used the saw too keep James from waking up. * 2288 x 1712 * (1.34MB)

DSCN4410 * 2288 x 1712 * (1.34MB)

DSCN4411 * Thicker then I figured. * Thicker then I figured. * 2288 x 1712 * (1.28MB)

DSCN4412 * This will weld nicely when I find a piece. * This will weld nicely when I find a piece. * 2288 x 1712 * (1.41MB)

Album last updated on Oct 25, 2009 - 06:03 PM
Powered by Jalbum 8.5 and BluPlusPlus skin
GT6.ca