HOME  »  Andre's 1968 Triumph GT6 MK1 - 2008 Photo Gallery » 28 Dec 2008 Coil Mounting  (6 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN4220 * Worked on the coil footing today. * Worked on the coil footing today. * 2288 x 1712 * (1.39MB)
DSCN4221 * I will use 3 nuts to level the coil pack and keep it off the firewall deck. * I will use 3 nuts to level the coil pack and keep it off the firewall deck. * 2288 x 1712 * (1.36MB)
DSCN4222 * This is the intended location, I check the spark plug wires and it will work. * This is the intended location, I check the spark plug wires and it will work. * 2288 x 1712 * (1.37MB)
DSCN4223 * Just have to move the big ground and water hose. * Just have to move the big ground and water hose. * 2288 x 1712 * (1.3MB)
DSCN4231b * +8 today, should have fired up the GT6. * +8 today, should have fired up the GT6. * 2288 x 1712 * (1.97MB)
  DSCN4220  
  DSCN4221  
  DSCN4222  
  DSCN4223  
  DSCN4231b  
DSCN4232b * But ran out of time so opted not to start her up. It is a bit damp in the garage so it was good to air out today. * But ran out of time so opted not to start her up. It is a bit damp in the garage so it was good to air out today. * 1712 x 2288 * (2.03MB)
  DSCN4232b  
Album last updated on Mar 06, 2009 - 05:02 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca