HOME  »  Andre's 1968 Triumph GT6 MK1 - 2008 Photo Gallery » 17 Dec 2008 MJLJ MAP  (9 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN4142 * Hardware to get the MJLJ MAP going. 6ft of silicon hose and 2 10-32 fittings. * Hardware to get the MJLJ MAP going. 6ft of silicon hose and 2 10-32 fittings. * 2288 x 1712 * (1.44MB)
DSCN4156 * 10-32 tap and some nice titaium drill bits. * 10-32 tap and some nice titaium drill bits. * 2288 x 1712 * (1.35MB)
DSCN4157 * I was reading the Spirfire guys where having good success use mig tips to limit the air spikes from the MAP. * I was reading the Spirfire guys where having good success use mig tips to limit the air spikes from the MAP. * 2288 x 1712 * (1.31MB)
DSCN4158 * So I'll use a 0.6mm tip to start off. * So I'll use a 0.6mm tip to start off. * 2288 x 1712 * (1.36MB)
DSCN4159 * Ok my intake. * Ok my intake. * 2288 x 1712 * (1.34MB)
  DSCN4142  
  DSCN4156  
  DSCN4157  
  DSCN4158  
  DSCN4159  
DSCN4160 * This is 1 location. * This is 1 location. * 2288 x 1712 * (1.45MB)
DSCN4161 * 2288 x 1712 * (1.41MB)
DSCN4162 * Oh here on the side? * Oh here on the side? * 2288 x 1712 * (1.44MB)
DSCN4163 * 2288 x 1712 * (1.31MB)
  DSCN4160  
  DSCN4161  
  DSCN4162  
  DSCN4163  
Album last updated on Mar 06, 2009 - 05:01 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca