HOME  »  Andre's 1968 Triumph GT6 MK1 - 2006 Photo Gallery » 28 Feb 2006 A Good Time To Brake  (12 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN0318 * Tonight went well. I prepped the driver side brake. Passenger shown. * Tonight went well. I prepped the driver side brake. Passenger shown. * 2288 x 1712 * (1.38MB)
DSCN0309 * Installed the rotor and caliper. Bolted down to spec. Livia's son Kevin did the rotor for me. * Installed the rotor and caliper. Bolted down to spec. Livia's son Kevin did the rotor for me. * 2288 x 1712 * (1.36MB)
DSCN0310 * Then installed those lovely TSI Carbon Kevlar front brake pads I bought from Ted Schumacher. * Then installed those lovely TSI Carbon Kevlar front brake pads I bought from Ted Schumacher. * 2288 x 1712 * (1.35MB)
DSCN0311 * All new Copper Nickel Brake Lines & SS Hoses from Spitbits. * All new Copper Nickel Brake Lines & SS Hoses from Spitbits. * 2288 x 1712 * (1.31MB)
DSCN0312 * Dad and Mike did not like how I had run my lines so they redid them. :) * Dad and Mike did not like how I had run my lines so they redid them. :) * 2288 x 1712 * (1.38MB)
  DSCN0318  
  DSCN0309  
  DSCN0310  
  DSCN0311  
  DSCN0312  
DSCN0313 * All the lines received some attention from them. Thanks guys much better. * All the lines received some attention from them. Thanks guys much better. * 2288 x 1712 * (1.27MB)
DSCN0314 * Its coming along. This was a very rewarding evening. * Its coming along. This was a very rewarding evening. * 2288 x 1712 * (1.38MB)
DSCN0319 * I see brake parts, oh so sexy. * I see brake parts, oh so sexy. * 2288 x 1712 * (1.34MB)
DSCN0320 * I know could have done the caliper in red, but I did not want to take away from the colours the car has now. * I know could have done the caliper in red, but I did not want to take away from the colours the car has now. * 2288 x 1712 * (1.33MB)
DSCN0315 * Dad finished up the tail end wires. * Dad finished up the tail end wires. * 2288 x 1712 * (1.36MB)
  DSCN0313  
  DSCN0314  
  DSCN0319  
  DSCN0320  
  DSCN0315  
DSCN0316 * We had to cut into a mount to be able to bolt the plate lamp. * We had to cut into a mount to be able to bolt the plate lamp. * 2288 x 1712 * (1.39MB)
DSCN0317 * Very clean job. Thanks Dad. * Very clean job. Thanks Dad. * 2288 x 1712 * (1.37MB)
  DSCN0316  
  DSCN0317  
Album last updated on May 05, 2009 - 09:47 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca