HOME  »  Andre's 1968 Triumph GT6 MK1 - 2006 Photo Gallery » 29 Jan 2006 Lighting The Rear  (12 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN0187 * Wash bottle and horn relay installed. * Wash bottle and horn relay installed. * 2288 x 1712 * (1.37MB)
DSCN0188 * Rear lights mounted, tip on the retaining clips I found WD40 helped them slip into place. * Rear lights mounted, tip on the retaining clips I found WD40 helped them slip into place. * 2288 x 1712 * (1009KB)
DSCN0189 * Rear tail lights installed. I still need to do up the ground cable. * Rear tail lights installed. I still need to do up the ground cable. * 2288 x 1712 * (1.34MB)
DSCN0190 * Passenger side in progress. * Passenger side in progress. * 2288 x 1712 * (1.34MB)
DSCN0191 * Plates and logo installed. * Plates and logo installed. * 2288 x 1712 * (2.0MB)
  DSCN0187  
  DSCN0188  
  DSCN0189  
  DSCN0190  
  DSCN0191  
DSCN0192 * I will use a cover to protect my vintage plates. * I will use a cover to protect my vintage plates. * 2288 x 1712 * (1.71MB)
DSCN0194 * These were supposed to be the mounts for my TRIUMPH letters, but they are too small for the holes. * These were supposed to be the mounts for my TRIUMPH letters, but they are too small for the holes. * 2288 x 1712 * (1.15MB)
DSCN0195 * Another problem part. The rear hatch handle from SpitBits does not fit into my hatch. I'll have to drill it out. * Another problem part. The rear hatch handle from SpitBits does not fit into my hatch. I'll have to drill it out. * 2288 x 1712 * (1.09MB)
DSCN0198 * These lights are a bugger to put on. Cut my thumb nicely trying to run the rubber.
Plate light is an on going issue. I had to move a hole that did not line up and have access issue from the other side. * These lights are a bugger to put on. Cut my thumb nicely trying to run the rubber.
Plate light is an on going issue. I had to move a hole that did not line up and have access issue from the other side. * 2288 x 1712 * (1.82MB)
DSCN0199 * But they are installed. Hope everything works. * But they are installed. Hope everything works. * 2288 x 1712 * (1.15MB)
  DSCN0192  
  DSCN0194  
  DSCN0195  
  DSCN0198  
  DSCN0199  
DSCN0201 * The mount for the fuel tank is not in the correct spot. I'll have to figure out a repair. * The mount for the fuel tank is not in the correct spot. I'll have to figure out a repair. * 2288 x 1712 * (1.43MB)
DSCN0202 * Back side of the lights. Wiring will be all tidy before the tank goes in. * Back side of the lights. Wiring will be all tidy before the tank goes in. * 2288 x 1712 * (1.14MB)
  DSCN0201  
  DSCN0202  
Album last updated on May 05, 2009 - 09:46 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca