HOME  »  Andre's 1968 Triumph GT6 MK1 - 2006 Photo Gallery » 21 Jan 2006 Weekend Work  (8 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN0110 * Installed both masters today. Tip, brake needs to be on the mount before putting that on the car.
Install the boot before you put in the connecting pin. Hard lessons learned. * Installed both masters today. Tip, brake needs to be on the mount before putting that on the car.
Install the boot before you put in the connecting pin. Hard lessons learned. * 2288 x 1712 * (1.46MB)
DSCN0112 * I installed the rear hatch, still need to align it. * I installed the rear hatch, still need to align it. * 2288 x 1712 * (1.33MB)
DSCN0113 * All new hardware as usual. * All new hardware as usual. * 2288 x 1712 * (1.42MB)
DSCN0114 * The paint on the studs are a bugger, but a little cleaning helps. I should try and remove that broken stud. * The paint on the studs are a bugger, but a little cleaning helps. I should try and remove that broken stud. * 2288 x 1712 * (1.35MB)
DSCN0116 * Installed the bumper mounts. * Installed the bumper mounts. * 2288 x 1712 * (1.39MB)
  DSCN0110  
  DSCN0112  
  DSCN0113  
  DSCN0114  
  DSCN0116  
DSCN0117 * I would had the bumpers on today, but the snow plow came by and put 2 feet of heavy snow at the end of the drive way. * I would had the bumpers on today, but the snow plow came by and put 2 feet of heavy snow at the end of the drive way. * 2288 x 1712 * (1.47MB)
DSCN0120 * Smurf getting some winter day light. * Smurf getting some winter day light. * 2288 x 1712 * (1.45MB)
DSCN0121 * While watching the Sens vs the Leafs I taped up the rear harness. I'll install it on Sunday. The loose wires will be bound once installed. * While watching the Sens vs the Leafs I taped up the rear harness. I'll install it on Sunday. The loose wires will be bound once installed. * 2288 x 1712 * (1.33MB)
  DSCN0117  
  DSCN0120  
  DSCN0121  
Album last updated on May 05, 2009 - 09:46 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca