HOME  »  Andre's 1968 Triumph GT6 MK1 - 2006 Photo Gallery » 18 Jan 2006 Blasting Parts  (5 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN0100 * So this afternoon I went out to Brian's to drop off some parts for my distributor which is in need of work and to do some blasting. I did my intake. * So this afternoon I went out to Brian's to drop off some parts for my distributor which is in need of work and to do some blasting. I did my intake. * 2288 x 1712 * (1.41MB)
DSCN0101 * The inside of the fuel cap which had a lot of build up. * The inside of the fuel cap which had a lot of build up. * 2288 x 1712 * (1.43MB)
DSCN0102 * The brakes, the one on the right had an epoxy paint on it, very hard to get off. They will be cleaned and rebuilt soon. I hope the pistons are good. * The brakes, the one on the right had an epoxy paint on it, very hard to get off. They will be cleaned and rebuilt soon. I hope the pistons are good. * 2288 x 1712 * (1.48MB)
DSCN0103 * The pully. Might leave it unpainted. * The pully. Might leave it unpainted. * 2288 x 1712 * (1.4MB)
DSCN0104 * And a whack of other parts. Intake/exhaust clamps, seat belt harness, nuts and bolts, light housins and so on. Thank Doc for letting me using your awesome booth. * And a whack of other parts. Intake/exhaust clamps, seat belt harness, nuts and bolts, light housins and so on. Thank Doc for letting me using your awesome booth. * 2288 x 1712 * (1.43MB)
  DSCN0100  
  DSCN0101  
  DSCN0102  
  DSCN0103  
  DSCN0104  
Album last updated on May 05, 2009 - 09:46 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca