HOME  »  B-Quiet Install  (12 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
 
IMG_7463 * So I started my day of Triumph off having fun.
But soon discovered I need a press to do my transmission. * 3072 x 2048 * (2.07MB)
IMG_7464 * Mike and Bob showed up, so we went to town putting in the B-Quiet® Extreme. * 3072 x 2048 * (2.77MB)
IMG_7465 * We are all impressed with how well it forms, it will reduce the road noise and cut down the heat inside the GT6 cabin. * 3072 x 2048 * (2.25MB)
IMG_7466 * Its a much easier job when you have 2 sets of hands. * 3072 x 2048 * (2.52MB)
  IMG_7463  
  IMG_7464  
  IMG_7465  
  IMG_7466  
 
IMG_7469 * That's the 50 sq ft roll. It should be enough to do the GT6, but to be sure, I've doing the important areas first. * 3072 x 2048 * (1.95MB)
IMG_7470 * Will finish the truck/boot area last. * 3072 x 2048 * (2.43MB)
IMG_7471 * B-Quiet® Extreme is only 1.15mm (45mil) thick. * 3072 x 2048 * (1.95MB)
IMG_7473 * While shooting the stills I decided to start the pass side. * 3072 x 2048 * (2.51MB)
  IMG_7469  
  IMG_7470  
  IMG_7471  
  IMG_7473  
 
IMG_7474 * Also finished the roof off. * 3072 x 2048 * (2.65MB)
IMG_7475 * Its easy to install this stuff. * 3072 x 2048 * (2.6MB)
IMG_7481 * Driver side is complete. * 3072 x 2048 * (2.52MB)
IMG_7482 * Good night Smurf. * 3072 x 2048 * (2.45MB)
  IMG_7474  
  IMG_7475  
  IMG_7481  
  IMG_7482  
 
 
 
Album last updated on Dec 28, 2005 - 08:20 PM
 
Powered by JAlbum 6.1 and BluPlusPlus skin
 
justdrive.ca