HOME  »  Engine Work Issues  (15 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
IMG_7035 * Con Rod 6 * 3072 x 2048 * (2.56MB)
IMG_7036 * The small end bearing has a deep score, that needs to be fixed. * 3072 x 2048 * (2.42MB)
IMG_7037 * The crank. * 3072 x 2048 * (3.04MB)
IMG_7038 * Grinded 10 and balanced. * 3072 x 2048 * (3.02MB)
IMG_7039 * One of the drill points for balancing. * 3072 x 2048 * (2.77MB)
  IMG_7035  
  IMG_7036  
  IMG_7037  
  IMG_7038  
  IMG_7039  
IMG_7040 * The head all cleaned. * 3072 x 2048 * (2.65MB)
IMG_7041 * Looks good. * 3072 x 2048 * (2.48MB)
IMG_7042 * NOT GOOD. * 3072 x 2048 * (2.65MB)
IMG_7043 * Looks like something was not done right. * 3072 x 2048 * (2.63MB)
IMG_7044 * I think the head was put into the bag wet. * 3072 x 2048 * (3.09MB)
  IMG_7040  
  IMG_7041  
  IMG_7042  
  IMG_7043  
  IMG_7044  
IMG_7045 * Bad bad bad. It goes back in the morning. * 3072 x 2048 * (3.0MB)
IMG_7046 * Block, I will move fast to avoid rust. * 3072 x 2048 * (2.9MB)
IMG_7047 * Dupli-Colour Cast Iron Engine Paint. * 3072 x 2048 * (2.52MB)
IMG_7048 * Front plate, 3 coats of paint. * 3072 x 2048 * (2.32MB)
IMG_7049 * Rear engine oil seal plate. * 3072 x 2048 * (2.74MB)
  IMG_7045  
  IMG_7046  
  IMG_7047  
  IMG_7048  
  IMG_7049  
Album last updated on Oct 27, 2005 - 09:39 PM
Powered by JAlbum 5.2 and BluPlusPlus skin
justdrive.ca