HOME  »  Transmission Lay Gear  (10 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
IMG_6870 * I think this old fibreglass gear box cover is tired.
Still I may try and refinish it. * 3072 x 2048 * (2.74MB)
IMG_6873 * Gear box housing scrubbed and painted. * 3072 x 2048 * (2.91MB)
IMG_6874 * Lower valance in rough shape. * 3072 x 2048 * (3.03MB)
IMG_6875 * Main shaft and the bearing I found on it.
Is that puppy stock? * 3072 x 2048 * (1.81MB)
IMG_6878 * Input shaft, 4th gear looks fine, I'll replace the bearing. * 3072 x 2048 * (2.1MB)
  IMG_6870  
  IMG_6873  
  IMG_6874  
  IMG_6875  
  IMG_6878  
IMG_6880 * The lay gear.
Looks healthy. * 3072 x 2048 * (2.03MB)
IMG_6881 * Now is that stock?
I'm thinkink its aftermarket. * 3072 x 2048 * (1.98MB)
IMG_6882 * Or some kind of insert. * 3072 x 2048 * (1.88MB)
IMG_6884 * 2nd gear. Thats why I could not go into 2nd above 3500 RPM. * 3072 x 2048 * (2.0MB)
IMG_6885 * And the main bearing, to be replaced as well.
The bearings might be ok, but if I'm in there doing this work might as wel swap them out. * 3072 x 2048 * (1.91MB)
  IMG_6880  
  IMG_6881  
  IMG_6882  
  IMG_6884  
  IMG_6885  
Album last updated on Sep 10, 2005 - 05:00 PM
Powered by JAlbum 5.2 and BluPlusPlus skin
justdrive.ca