HOME  »  Rad Blasted  (10 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
IMG_6854 * Ok this is the driver rear wheel.
This stud is not centred on the hub. Its about 1-3mm too high. * 3072 x 2048 * (2.49MB)
IMG_6855 * See the nut will not go in clean.
Need to fix that soon. * 3072 x 2048 * (2.16MB)
IMG_6857 * 3072 x 2048 * (2.36MB)
IMG_6858 * 3072 x 2048 * (2.21MB)
IMG_6859 * Ah this is my freshly pressure tested rad.
It held 18+ PSI. Then we blasted & flushed it. * 3072 x 2048 * (2.84MB)
  IMG_6854  
  IMG_6855  
  IMG_6857  
  IMG_6858  
  IMG_6859  
IMG_6861 * Pretty. * 3072 x 2048 * (3.4MB)
IMG_6862 * I'll fix those fins and paint the rad soon. * 3072 x 2048 * (2.32MB)
IMG_6863 * Transmission case. * 3072 x 2048 * (2.41MB)
IMG_6864 * Main shaft, we used a bearing puller to get her free. * 3072 x 2048 * (2.49MB)
IMG_6865 * The cluster gear looks healthy. I'll clean and inspect them shortly. * 3072 x 2048 * (2.37MB)
  IMG_6861  
  IMG_6862  
  IMG_6863  
  IMG_6864  
  IMG_6865  
Album last updated on Sep 06, 2005 - 09:45 PM
Powered by JAlbum 5.2 and BluPlusPlus skin
justdrive.ca